|
PEJRS黑色金属速干冲压油PEJRS VOLATILE PUNCHING OR TAPPING OIL FOR FERROUS
PEJRS CY1500速干冲压油，在满足免清洗的条件下有效防止金属材料剪切口的生锈问题，适用于厚度为0.8mm以下黑色金属的冲压或无屑攻丝, 干燥时间为10分钟左右，残留物为0.5%。
PEJRS CY1500 volatile punching oil is a kind of anti-rust punching oil, it is suitable for punching or non-crumbs tapping of ferrous (<0.8mm), it can protect metal from rusting effectively, after punching or tapping the products can excuse cleaning. The hours of evaporation is about 10 minutes, the residue is about 0.5%.
PEJRS CY1510速干冲压油，在满足免清洗的条件下有效防止金属材料剪切口的生锈问题，适用于厚度为1.5mm以下黑色金属的冲压或无屑攻丝, 干燥时间为12分钟左右，残留物为1.0%。
PEJRS CY1510 volatile punching oil is a kind of anti-rust punching oil, it is suitable for punching or non-crumbs tapping of ferrous (<1.5mm), it can protect metal from rusting effectively, after punching or tapping the products can excuse cleaning. The hours of evaporation is about 12 minutes, the residue is about 1.0%. |
|
PRODUCT NAME
产品名称 |
FLASH POINT(OPEN)
闪点
k闭口），℃ |
RESIDUE
残留
% |
DRY TIME
干燥时间
min |
APPLICATION
应用 |
MATERIAL
适合材质 |
|
PEJRS CY1500速干冲压油 |
55 |
0.5 |
10 |
冲压、免清洗
板厚: 0.8mm以下 |
钢、镀锌钢板等材料 |
|
PEJRS CY1510速干冲压油 |
58 |
1.0 |
12 |
冲压、免清洗
板厚: 1.5mm以下 |
钢、镀锌钢板等材料 |
|
PEJRS有色金属速干冲压油PEJRS VOLATILE PUNCHING OIL FOR
PEJRS CY1520 速干冲压油适用于铜材、铝材及其合金(厚度0.8mm以下)等有色金属材料免清洗冲压或挤压式攻丝加工, 干燥时间10分钟，残留0.3%.
PEJRS CY1520 volatile punching oil can be used in punching or non-crumbs tapping for cupper, aluminum and its alloys (<0.8mm), after punching the products can excuse cleaning. The hours of evaporation is about 10 minutes, the residue is about 0.3%.
PEJRS CY1530速干冲压油适用于铜材、铝材及其合金(厚度1.5mm以下)等有色金属材料免清洗冲压或挤压式攻丝加工, 干燥时间15分钟，残留0.5%.
PEJRS CY1530 volatile punching oil can be used in punching or non-crumbs tapping for cupper, aluminum and its alloys (<1.5mm), after punching the products can excuse cleaning. The hours of evaporation is about 15 minutes; the residue is about 0.5%. |
|
PRODUCT NAME
产品名称 |
FLASH POINT
(OPEN)
闪点（闭口），℃ |
RESIDUE
残留
% |
DRY TIME
干燥时间
min |
APPLICATION
应用 |
MATERIAL
适合材质 |
|
PEJRS CY1520速干冲压油 |
55 |
0.3 |
10 |
冲压免清洗
板厚: 0.8mm以下 |
铜、铝及其合金 |
|
PEJRS CY1530速干冲压油 |
58 |
0.5 |
15 |
冲压免清洗
板厚: 1.5mm以下 |
铜、铝及其合金 |
|
PEJRS黑色、有色金属通用型速干冲压油PEJRS GENERAL VOLATILE PUNCHING OIL
PEJRS CY1540速干冲压油适用于黑色金属、铜材、铝材及其合金等有色金属材料(厚度0.8mm以下)免清洗冲压或挤压式攻丝加工, 干燥时间10分钟，残留0.8%.
PEJRS CY1540 volatile punching oil can be used in punching or non-crumbs tapping for ferrous cupper, aluminum and its alloys (<0.8mm), after punching or non-crumbs tapping the products can excuse cleaning. The hours of evaporation is about 10 minutes, the residue is about 0.8%.
PEJRS CY1550速干冲压油适用于黑色金属、铜材、铝材及其合金等有色金属材料(厚度1.5mm以下)免清洗冲压或挤压式攻丝加工, 干燥时间12分钟，残留1.0%.
PEJRS CY1550 volatile punching oil can be used in punching or non-crumbs tapping for cupper, aluminum and its alloys (<1.5mm), after punching or non-crumbs tapping the products can excuse cleaning. The hours of evaporation is about 12 minutes, the residue is about 1.0%. |
|
PRODUCT NAME
产品名称 |
FLASH POINT
(OPEN)
闪点（闭口），℃ |
RESIDUE
残留
% |
DRY TIME
干燥时间
min |
APPLICATION
应用 |
MATERIAL
适合材质 |
|
PEJRS CY1540速干冲压油 |
55 |
0.8 |
10 |
冲压免清洗
板厚: 0.8mm以下 |
钢、镀锌钢板
铜、铝及其合金 |
|
PEJRS CY1550速干冲压油 |
58 |
1.0 |
12 |
冲压免清洗
板厚: 1.5mm以下 |
钢、镀锌钢板
铜、铝及其合金 |
|
PEJRS坚韧材速干冲压油PEJRS VOLATILE PUNCHING OIL FOR HIGH HARDNESS METAL
PEJRS CY1560速干冲压油可用于不锈钢等高硬度金属材料(厚度0.4mm以下)的薄板冲压加工。干燥时间为15分钟左右，残留物为1.0%。
PEJRS CY1560 can be used in punching of thin stainless steel plate (<0.4mm). The hours of evaporation is about 15 minutes , the residue is about 1.0%.
PEJRS CY1570速干冲压油可用于不锈钢等高硬度金属材料(厚度0.6mm以下)的薄板冲压加工。干燥时间为20分钟左右，残留物为1.2%。
PEJRS CY1570 can be used in punching of thin stainless steel plate (<0.6mm). The hours of evaporation is about 20 minutes, the residue is about 1.2%. |
|
PRODUCT NAME
产品名称 |
FLASH POINT
(OPEN)
闪点（闭口）℃ |
RESIDUE
残留 % |
DRY TIME
干燥时间
min |
APPLICATION
应用 |
MATERIAL
适合材质 |
|
PEJRS CY1560速干冲压油 |
60 |
1.0 |
15 |
冲压、免清洗
板厚: 0.6mm以下 |
不锈钢 |
|
PEJRS CY1570速干冲压油 |
62 |
1.2 |
20 |
冲压、免清洗
板厚: 0.6mm以下 |
不锈钢 |
|
PEJRS硅钢片速干冲压油PEJRS VOLATILE PUNCHING OIL FOR SILICON STEEL
PEJRS CY1580速干冲压油适用于硅钢片(厚度0.6mm以下)免清洗冲压加工, 干燥时间10分钟，残留0.5%.
PEJRS CY1580 volatile punching oil can be used in punching of silicon steel plate (<0.6mm), after punching the products can excuse cleaning. The hours of evaporation is about 10 minutes, the residue is about 0.5%.
PEJRS CY1590速干冲压油适用于硅钢片(厚度1.0mm以下)免清洗冲压加工, 干燥时间15分钟，残留0.8%.
PEJRS CY1590 volatile punching oil can be used in punching of silicon steel plate (<1.0mm), after punching the products can excuse cleaning. The hours of evaporation is about 15 minutes, the residue is about 0.8%. |
|
PRODUCT NAME
产品名称 |
FLASH POINT
(OPEN)
闪点（闭口）℃ |
RESIDUE
残留 % |
DRY TIME
干燥时间
min |
APPLICATION
应用 |
MATERIAL
适合材质 |
|
PEJRS CY1580速干冲压油 |
55 |
0.5 |
10 |
冲压、免清洗
板厚: 0.6mm以下 |
硅钢片、钢、镀锌钢板 |
|
PEJRS CY1590速干冲压油 |
58 |
0.8 |
15 |
冲压、免清洗
板厚: 1.0mm以下 |
硅钢片、钢、镀锌钢板 |
|
